Well, a few weeks back I talked about the Elgato HD60 PRO PCI Express card I picked up and the fairly nice experience I’ve had with it. But as terrific as it is, it doesn’t feature legacy ports. If you’re like me, you’re not going to be content with only capturing footage, and screens from current consoles. You likely have a lot of older devices, and games knocking around that you want to hook up. You might want to stream these games. Or, maybe none of this describes you, and you simply want to hook up your old PlayStation to your new TV. But alas, that TV has nothing on it other than an HDMI input or two.
This is where you’re going to need an upscaling device. There is a slew of different upscalers to choose from. The most famous one being the Framemeister. Of course between the massive amount of features and the fact that it is no longer produced, it’s pretty expensive. It also isn’t something a lot of people necessarily need. Unless you have a lot of SCART compatible computers, consoles, and just have to go the extra expensive mile for clarity you can spend less.
PROS: It’s inexpensive! It does what it advertises!
CONS: There aren’t many advanced features.
BAH: Another device that doesn’t include an AC Adapter.
The Old Skool AV to HDMI converter can be had very cheaply. I only paid around $20 at a local small business for mine, and I went in completely skeptically. In my case, I needed something to temporarily use until I could get something a step up. Was I right to feel a bit cynical? A little bit of “Yes”, and a little bit of “No.”.
For the money, the device does what it advertises for the most part. On the plus side, it’s compact. This makes it easy to store and keeps it out of the way at your desk. Or helps you reduce the size of your nest of wires behind the TV. When you open the package you’ll find the converter itself, a USB cable, and some documentation on how to connect it to your devices. On the converter, there is a switch to change the output between 720p or 1080p. Sadly, there’s no AC adapter to go on the end of the USB cable. If you’re using this with your TV, you’ll have to repurpose one you already own, or you’ll have to buy one.
I tested the unit out with my Elgato HD60 PRO, and I had some mixed results. Generally, it worked as advertised. I was easily able to fire up my NES and play Rolling Thunder with ease. I noticed little to no difference between setting the device on either 720p or 1080p. Most of the other games I tried after worked fine as well, although some of the tricks programmers used with the tech of the time don’t display as they did on a modern TV. For instance, when playing Batman: Return Of The Joker, Batman’s wave blaster projectiles would sometimes cut out of the image.
Nothing that makes the game unplayable, but something to be aware of. Some old games may have quirks that a low-end solution like this won’t solve. Another thing to be aware of is input lag. Some games like Mike Tyson’s Punch-Out!! are harder to beat on a modern TV because HDTVs have to convert the signal from analog to their digital displays with a built-in scaler. This process takes some time, and so games that require split-second timing will have a noticeable pause between the time you press a button, and seeing the results on the screen.
Depending on the scaler in the TV this process can be any number of milliseconds. External upscalers can reduce this significantly by converting the signal before it even gets to the television. But it won’t eliminate the lag entirely. Even the best devices won’t eliminate all lag. How does the Old Skool do in this regard? Well depending on what you’re using there can be different results. On my capture card, I did notice a tiny amount on Mike Tyson’s Punch-Out!!. Not enough to make the game unbeatable, but definitely harder than when playing on an old CRT. On my 720P set, which has composite inputs, it did a little bit better than the set’s built-in scaler. At least in terms of lag. It fared better on the newer 4k set in the living room, but it was still noticeable.
That said, the majority of my old stuff worked just fine for the most part on everything I threw at it, on all three setups. However, one thing that is a little disappointing, is it cannot push a 4:3 aspect ratio. So everything will be stretched out to fill the screen. On my capture card, even selecting a “Do not stretch” option in the software wouldn’t put the aspect ratio in a standard 4:3, although I could go down to a 480p resolution. That made the image look a little bit muted, but didn’t perform much better than taking a 720p or 1080p option.
On the TVs, I had to force a 4:3 option through their respective menus. Otherwise, the default was to simply let the box stretch everything to full screen. Going with the 1080p option did look the cleanest, and so that’s probably what you’ll want to use unless performance issues crop up on your specific set. In my case, I didn’t notice much in the way of artifacts, or bands in spite of the stretched image. Putting it to a 4:3 aspect ratio through the TV menus did make it look a bit better.
In spite of the issues I’ve mentioned here, I can’t really say this is a bad product. For the low price, it does allow you to get most of your vintage consoles, DVD players, and VHS decks hooked up to a new TV or capture card. It has a respectable picture quality, and performance is pretty good for the most part. If you’re really just looking to play your Sega Genesis games, and you only have an HDTV with HDMI inputs this will fit the bill. You can also use this for entry-level streaming, or capturing game footage for a video project. It’s going to be a fine enough solution for the average person who wants to play their old games, or dip their toes into streaming said old games.
But, if you’re somebody who is into speed running old games you may want something nicer, that reduces input lag further than this will. If you’re a competitive gamer the same may also hold true for you. Those who are deep into the hobby of old games might want something that can support more input options like S-Video, SCART, or even VGA. So that they can have the best possible image quality when playing their Sega Dreamcast on a modern TV. SCART is also ideal for anyone importing platforms from PAL territories, as it was a standard there, and some of those platforms never really made it to North America in a major way. If you’re interested in importing something like a ZX Spectrum or BBS Micro you’ll probably want a higher ended scaler that supports the standard.
Be that as it may, for a mere $20, even some of those better served by a higher ended solution may want to pick up the Old Skool as a stopgap measure. At the very least one can competently play their old games, or stream their old games with it until they can afford to buy a better solution. Some of the converters out there can become cost prohibitive.
While it has its faults, and you can’t expect miracles in the tier it occupies, the Old Skool AV to HDMI converter gets the job done competently. You get what is advertised. Nothing more. Nothing less. if you’re an absolute perfectionist or someone who has to have better than average performance you’ll want to invest in something a bit better. For a lot of other folks out there, as long as you’re okay with a no-frills experience you’ll be happy with this device.
Final Score: 7 out of 10